アクセス数 : 1219 件
ダウンロード数 : 144 件
この文献の参照には次のURLをご利用ください : https://ir.lib.shimane-u.ac.jp/3714
島根大学農学部研究報告 Volume 6
published_at 1972-12-15
2サイクル・ガソリン機関をもつ林業機械の振動 : 動力鋸・刈払機について
On the Vibration of Forestry Machine with 2 Cycle Gasolin Engine : Cases of Chain-Saw & Bush-Cutter
Sakurai Toshio
Tanaka Chiaki
full_text_file
d0030006n017.pdf
( 808 KB )
Descriptions
This paper deals with the vibration behaviour of chain-saws and bush-cutters generated by two-cycle engines. The measurement instruments were three accelerometers, three amplifiers and an electromagnetic oscillograph. Vibration was measured at the handle of the chain-saw and the bush-cutter.
Conclusions are summarized as follows :
1) Vibratory-acceleration level generated by bush-cutter is about half as much as that generated by chain-saw.
2) Vibratory-acceleration level generated by a chain-saw with vibration isolator was reduced to about 25 percent level.
3) Vibratory-acceleration level generated by sawing is approximately equal to that generated by no-load running, and displacement amplitude of chain-saw was evaluated at about 0.05-0.2 mm.
Conclusions are summarized as follows :
1) Vibratory-acceleration level generated by bush-cutter is about half as much as that generated by chain-saw.
2) Vibratory-acceleration level generated by a chain-saw with vibration isolator was reduced to about 25 percent level.
3) Vibratory-acceleration level generated by sawing is approximately equal to that generated by no-load running, and displacement amplitude of chain-saw was evaluated at about 0.05-0.2 mm.
About This Article
Pages
Other Article