| ファイル情報(添付) | |
| タイトル | 合板の乾燥について(接着剤の塗布量と乾燥速度) | 
| タイトル | Studies on the drying of plywood(The relationship between the spreading adhesive and the drying velocity) | 
| タイトル 読み | ゴウハン ノ カンソウ ニツイテ セッチャクザイ ノ トフリョウ ト カンソウ ソクド | 
| 著者 | 
                                    福山 万次郎
                                    
                         | 
| 収録物名 | 島根農科大学研究報告 | 
| 巻 | 6 | 
| 開始ページ | (A)154 | 
| 終了ページ | 158 | 
| 収録物識別子 | ISSN 05598311 | 
| 内容記述 | 抄録・要旨 I made the experiment on the relationship between the spreading of adhesive and drying Velocity of plywood under the constant drying condition (60℃,19% and 40°, 33%). Plywoods used are as follows: I ) Veneer; birch-wood (thickness 0.84 mm). II) construction ; crossbanding plywood (3ply) III) adhesives ; a) urea-formaldehyde resin (U-resin) b) urea-formaldehyde resin containing extender (Wheat flour) (U-・resin). IIII) Spreading : 15, 20, 30, 35, 40, 50 and 60 g/ft^2 V) Pressure : 15kg/<cm>^2 VI) Press temperature; 100℃ VII) Press Period : 10min VIII) assembly time ; 30min VIIII) Specimen of plywood ; 25 × 25(<cm>^2), thickness ; 0.208-0.236cm Test pieces of about 5×5(<cm>^2) were coated with urea-formaldehyde resin to prevent the drying from four-side faces and then soaked until saturated (initial moisture content ; 90-103%). Results obtained are as follows ( I )The dying process (moisture content u : drying time Z) of plywood are shown in Fig 1 and the relationship between log u : Z in Fig. 2. From these facts we can obviously recognize three periods of drying ; constant, first and second stage of falling rate of drying. (II) We could not recognize the relationship between the drying velocity (du/dz) in constant rate of drying and the spreading, the adhesive of plywood (Table. 1) (III) As the results of Fig 1-3, the drying Velocity (du/dz) in falling rate of drying was given by the following formula ; du/dz=-1/k (u-u_<eq>) Coefficient K and its reciprocal 1/k are given in Table 2. The value of 1/k was decreasing corresponding to increasing of spreading of adhesive in each drying condition. (IIII) The relationship between the Vav/Vo (Vav = um = ueq, Vo = uo-ueq, Um = average moisture content, ueq = equilibrium moisture content, uo = initial morsture content) and t/((a/2)^2)(t = drying time, a = thickness of plywood) are shown in Fig. 4. The moisture diffusivity K was decreasing corresponding to increasing of spreading of urea-formaldehyde resin under the drying condition 60℃, 19%, but this relation was irregular under other conditions. | 
| 言語 | 日本語 | 
| 資源タイプ | 紀要論文 | 
| 出版者 | 島根農科大学 The Shimane Agricultural College | 
| 発行日 | 1958-03-31 | 
| アクセス権 | オープンアクセス | 
| 関連情報 | 
                                    [NCID]
                                    AN00108241
                             | 
| 備考 | A,Bを含む |