| File | |
| Title |
堆肥埋込作業機開発の基礎研究(I) : 作業機の試作と供試材料の性質
|
| Title |
Fundamental Studies on Development of the Solid Manure Injector(I) : Trial Production of the Implement and Properties of the Test Material
|
| Title Transcription |
タイヒ ウメコミ サギョウキ カイハツ ノ キソ ケンキュウ 1 サギョウキ ノ シサク ト キョウシザイリョウ ノ セイシツ
|
| Creator |
Nakao Seiji
Kusuhara Katsuhiko
Fujiura Tateshi
Tanaka Kouzou
|
| Source Title |
島根大学農学部研究報告
Bulletin of the Faculty of Agriculture, Shimane University
|
| Volume | 24 |
| Start Page | 118 |
| End Page | 121 |
| Journal Identifire |
ISSN 0370940X
|
| Descriptions |
A solid manure injection system is a benifical method which reduces undesirable order and pollution problems from runoff. The soild manure injector，made as a trial，consists of three basic units that are furrow opener，manure auger conveyer and covering device with soil. This injector is located at the front end of a box type manure spreader，in which the travel direction of web is reversed in order to bring the manure to the front．
Mechanical properties of bark manure that is tested in the manure injector as experimental materialis investigated. The repose angle of bark manure is large with the increase of its moisture content and 70 dgree at 65～75% in moisture content. The internal friction angle of bark manure is 23.6 dgree. |
| Language |
jpn
|
| Resource Type | departmental bulletin paper |
| Publisher |
島根大学農学部
Shimane University, Faculty of Agriculture
|
| Date of Issued | 1990-12-21 |
| Access Rights | open access |
| Relation |
[NCID] AN00108015
|
