島根大学農学部
ISSN:0370-940X
ダウンロード数 : ? 件
この文献の参照には次のURLをご利用ください : https://ir.lib.shimane-u.ac.jp/3819
島根大学農学部研究報告 2
1968-12-15 発行
Chain Sawの機械的振動について(第2報) : 防振ゴムの効果
On the Mechanical Vibration of Chain Saw(II) : The Isolating Effects of Rubber Mounts round the Handle
桜井 敏夫
高橋 徹
藤田 晋輔
ファイル
内容記述（抄録等）
Vibrations originating from chain saw are generally transmitted to the worker's hand, effecting detriment of the physiology. To reduce the transmitted vibrations isolators in the form of spring, rubber mounts, or cork paddings are frequently used.
This report describes the results of the experimental studies obtained by using auto inner tubes(taxi and track wheel) as a possible vibration isolator.
The measurements of vibration transmitted from the chain saw handle to the back of the hand and the hanging device were carried out with accelerometers, dynamic strain amplifier and rapicoder. (Photos. 1 and 2)
From Figs. 4 and 5, it seems possible that the variation level of chain saw handle can be decreased to 60～70% when the rubber isolators are used.
This report describes the results of the experimental studies obtained by using auto inner tubes(taxi and track wheel) as a possible vibration isolator.
The measurements of vibration transmitted from the chain saw handle to the back of the hand and the hanging device were carried out with accelerometers, dynamic strain amplifier and rapicoder. (Photos. 1 and 2)
From Figs. 4 and 5, it seems possible that the variation level of chain saw handle can be decreased to 60～70% when the rubber isolators are used.
About This Article
NCID
AN00108015
Other Article