| File | |
| Title |
2サイクル・ガソリン機関をもつ林業機械の振動 : 動力鋸・刈払機について
|
| Title |
On the Vibration of Forestry Machine with 2 Cycle Gasolin Engine : Cases of Chain-Saw & Bush-Cutter
|
| Title Transcription |
2 サイクル ガソリン キカン オ モツ リンギョウ キカイ ノ シンドウ ドウリョク ノコ カリバライキ ニツイテ
|
| Creator |
Sakurai Toshio
Tanaka Chiaki
|
| Source Title |
島根大学農学部研究報告
Bulletin of the Faculty of Agriculture, Shimane University
|
| Volume | 6 |
| Start Page | 103 |
| End Page | 108 |
| Journal Identifire |
ISSN 0370940X
|
| Descriptions |
This paper deals with the vibration behaviour of chain-saws and bush-cutters generated by two-cycle engines. The measurement instruments were three accelerometers, three amplifiers and an electromagnetic oscillograph. Vibration was measured at the handle of the chain-saw and the bush-cutter.
Conclusions are summarized as follows : 1) Vibratory-acceleration level generated by bush-cutter is about half as much as that generated by chain-saw. 2) Vibratory-acceleration level generated by a chain-saw with vibration isolator was reduced to about 25 percent level. 3) Vibratory-acceleration level generated by sawing is approximately equal to that generated by no-load running, and displacement amplitude of chain-saw was evaluated at about 0.05-0.2 mm. |
| Language |
jpn
|
| Resource Type | departmental bulletin paper |
| Publisher |
島根大学農学部
Shimane University, Faculty of Agriculture
|
| Date of Issued | 1972-12-15 |
| Access Rights | open access |
| Relation |
[NCID] AN00108015
|
