| ファイル | |
| 言語 |
英語
|
| 著者 |
奥西 亮太
宮地 優悟
|
| 内容記述（抄録等） | This study presents a simple and feasible method for fabricating high-performance REBa_2Cu_3O_y (RE123) films. Nd123 films were established on a single crystalline substrate by the KOH flux method at low temperature and ambient pressure. Above 425°C, the Nd123 in the obtained films demonstrated single-phase and biaxial orientation. The T_c^<onset> of Nd123 film was 67.1 K when fabricated at 525°C but reduced at lower fabrication temperatures, presumably because the Nd became increasingly substituted with Ba. Moreover, the T_c^<onset> of the Nd123 film fabricated at 475°C was enhanced by controlling the Nd/Ba composition ratio in the starting materials.
|
| 主題 | Superconducting film
Critical temperature
KOH flux method
Liquid phase epitaxy
NdBa_2Cu_3O_y
|
| 掲載誌名 |
IEEE Transactions on Applied Superconductivity
|
| 巻 | 26
|
| 号 | 3
|
| 開始ページ | 7201404
|
| ISSN | 10518223
|
| 発行日 | 2016-04
|
| DOI | |
| DOI公開日 | 2017-01-16
|
| NCID | AA11946236
|
| 出版者 | IEEE (Institute of Electrical and Electronics Engineers)
|
| 資料タイプ |
学術雑誌論文
|
| ファイル形式 |
PDF
|
| 権利関係 | © 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.
|
| 著者版/出版社版 |
著者版
|
| 業績ID | e29691
e29673
|
| 部局 |
（旧組織）大学院総合理工学研究科
|
