島根大学農学部
ISSN:0370-940X
ダウンロード数 : ? 件
この文献の参照には次のURLをご利用ください : https://ir.lib.shimane-u.ac.jp/1990
島根大学農学部研究報告 24
1990-12-21 発行
堆肥埋込作業機開発の基礎研究(I) : 作業機の試作と供試材料の性質
Fundamental Studies on Development of the Solid Manure Injector(I) : Trial Production of the Implement and Properties of the Test Material
中尾 清治
楠原 勝彦
藤浦 建史
田中 幸三
ファイル
内容記述（抄録等）
A solid manure injection system is a benifical method which reduces undesirable order and pollution problems from runoff. The soild manure injector，made as a trial，consists of three basic units that are furrow opener，manure auger conveyer and covering device with soil. This injector is located at the front end of a box type manure spreader，in which the travel direction of web is reversed in order to bring the manure to the front．
Mechanical properties of bark manure that is tested in the manure injector as experimental materialis investigated. The repose angle of bark manure is large with the increase of its moisture content and 70 dgree at 65～75% in moisture content. The internal friction angle of bark manure is 23.6 dgree.
Mechanical properties of bark manure that is tested in the manure injector as experimental materialis investigated. The repose angle of bark manure is large with the increase of its moisture content and 70 dgree at 65～75% in moisture content. The internal friction angle of bark manure is 23.6 dgree.
About This Article
NCID
AN00108015
Other Article